DIY Umbrella Stand

It’s raining, it’s pouring, and your floors are getting wet! Rather than dealing with the hassle and mess, try one of these ingenious DIY umbrella stands to keep your floors dry. You don’t need to worry about the wet floor anymore and you can keep all the umbrellas stay in place as well.

But who wants to spend money on something you can easily make yourself?

These 26 ingenious DIY umbrella stand ideas are not only affordable but also super easy to create!

So next time it rains, be prepared with one of these handy stands. You’ll be glad you did.

1. Repurpose a Wine Barrel Into an Adorable Umbrella Stand

It’s a great way to add some extra storage to your entryway or patio. Plus, it’s a great conversation starter!

Here’s what you’ll need:

• A wine barrel
• A drill
• A jigsaw
• Sandpaper
• A sealant
• Umbrellas

First, cut the top off of the barrel using the jigsaw. Next, drill two holes near the top of the barrel, making sure they’re big enough to accommodate your umbrellas. Once the holes are drilled, sand down any rough edges.

If you’re planning on keeping the umbrella stand outdoors, you may want to apply a sealant to help protect it from the elements. Finally, simply insert your umbrellas and enjoy.

2. Use an Old Metal Bucket as a Rustic Umbrella Stand

To get started, simply place the bucket upside down and fill it with sand or gravel. This will help to weigh the bucket down and keep it from tipping over in windy weather. Next, use a drill to create a hole in the center of the bottom of the bucket.

This will be where the umbrella pole is inserted. Finally, add a layer of sand or pebbles around the outside of the bucket to give it a finished look. The weight of the sand will keep the umbrella stand in place, even in windy conditions.

3. Create a DIY Umbrella Stand Out of a Log Slice

This project is easy and affordable, and it adds a touch of rustic charm to any yard. To get started, simply find a log slice that is large enough to accommodate your umbrella. If you can’t find one at your local hardware store, try looking online.

Once you have your log slice, sand down the edges to smooth them out. Then, use a drill to create two holes in the center of the log slice. These holes will be used to thread the umbrella stand’s dowel rod through. Finally, finish the project by threading the dowel rod through the holes and placing your umbrella in the stand.

The huge slice log work functionally as the outdoor table as well.

4. Make a Simple Umbrella Stand from PVC Pipes and Fittings

Using the PVC pipes and fittings can be a perfect hack if you are on a budget. This quick and easy project can be completed in an afternoon using PVC pipes and fittings. Best of all, it will keep your umbrellas organized and within reach.

To get started, simply measure and cut the PVC pipes to size. Next, assemble the stand using PVC glue or primer. Once the glue has dried, your DIY umbrella stand is ready to use.

5. Transform an Old Pottery Urn Into an Elegant Umbrella Stand

It’s easy to turn it into a stylish and practical umbrella stand. Just clean the urn and place it upside down on a table or shelf. Then, fill the urn with sand or gravel, and insert your umbrella into the center.

The weight of the sand or gravel will keep the umbrella steady, even in strong winds. And if you want to add a bit of extra flair, consider decorating the urn with paint, mosaic tiles, or even shells.

6. DIY Wood Umbrella Stand

Made out of wood, it’s sturdy and will look great in any entryway or mudroom. Plus, it’s easy to make – all you need is a few boards and some basic tools. To make this wooden umbrella stand, you’ll need a piece of wood (preferably pine or cedar), a drill, dowel rods, a saw, sandpaper, and paint or stain.

Once you have all of your materials, you can start construction by drilling holes in the bottom of your piece of wood for the dowel rods. Next, cut the dowel rods to size and insert them into the holes. Finally, sand down any rough edges, apply your finish of choice, and let your umbrella stand dry.

7. Repurpose an Outdoor Chaise lounge Into a Shabby Chic Umbrella Stand

Upcycle the old chair into a shabby chic umbrella stand that will add a touch of elegance to any home. It is a straightforward project you can do during your leisure time.

On the other side, it won’t break your wallet since it only need some stuff you can find at home. You only need to attach the umbrella pole to the chair, then secure it well.

This is a great way to repurpose an old piece of furniture and add some personality to your décor. Plus, it’s a lot cheaper than buying a new umbrella stand.

8. Concrete Umbrella Stand

This DIY concreted umbrella stand is both! It’s super easy to make, and you can customize it to match your decor. Plus, the concrete will help keep your umbrella nice and dry.

Here’s what you’ll need:

• A mold or container to use as a mold
• Concrete mix
• Water
• A stirring stick
• A small bowl or cup for mixing
• A plastic bag or piece of cloth for covering the top of the mold
• An umbrella (optional)

To make your stand, first mix together the concrete and water in the bowl or cup. You want the mixture to be about the consistency of pancake batter. Then, pour the concrete into your mold, and use the stirring stick to even it out.

Make sure to leave enough room at the top for the plastic or cloth covering. Once the concrete is in the mold, cover it with the plastic or cloth, and then set it aside to cure for 24 hours. After that, just pop your umbrella into the stand, and you’re all set.

9. Use an Old Rain Boot as a Rustic Umbrella Stand

This simple DIY project is both easy and inexpensive, making it the perfect way to add a touch of rustic charm to your home. This super easy project can be done within minutes during your leisure time.

The most important thing is that it doesn’t require any certain skills. You can simply paint the boot as you desire or add a rainbow, then put them on the entryway to keep your umbrellas stay in place.

10. Cinder Block Umbrella Stand

Thankfully, this DIY cinder block umbrella stand is a quick and easy solution.

Simply find two cinder blocks of the same size and stack them on top of each other. Then, take a piece of rebar and insert it into the center of the two blocks.

Finally, add your umbrella and enjoy your shady spot! This stand is strong and sturdy, so you don’t have to worry about it tipping over in windy weather. Plus, it’s super cheap to make all you need are some cinder blocks and rebar.

11. Make a Modern Umbrella Stand from Copper Pipes

With just a few supplies and a little bit of elbow grease, you can create a modern umbrella stand that is both stylish and functional.

All you need is some copper pipe and fittings, plus a few tools that you probably already have around the house.

12. Umbrella Stand Planter

Add a touch of natural beauty to your outdoor area that can work functionally as an umbrella stand at the same time.

To get started, you’ll need a large planter, some sand or gravel, and a few rocks or bricks. First, fill the bottom of the planter with sand or gravel to help weigh it down. Then, arrange the rocks or bricks in the center of the planter to create a stable base for your umbrella.

Finally, fill the rest of the planter with soil and plant your favorite flowers or plants.

13. IKEA Hack Umbrella Stand

Upcycle the old and unused IKEA stool that can be transformed into an umbrella stand, which will hold your umbrella stylishly. On the other side, this simple hack is a perfect solution for a small space.

All you need is an IKEA stool and a drill. First, remove the stool’s legs. Then, use the drill to make two holes in the seat of the stool, slightly wider than your umbrella’s handle. Finally, screw the stool to the wall at a comfortable height.

This easy hack will help keep your floors dry and your umbrellas organized, without taking up any valuable floor space.

14. The Movable Decking Wood

Made from a repurposed decking wood, this umbrella stand is both cool and functional. It is also can be the best option if you are on a budget. On the other side, it is such an eco-friendly materials.

To start, you can create the frame, then attach the wheels to make it movable. Make a hole in the middle of the cover for the umbrella stand.

15. Recycled Tire Umbrella Stand

It’s a cheap and easy project that will take up very little space. Plus, it’s a great way to show off your creativity and add some fun, colorful flair to your outdoor living space. All you need is an old tire, some paint, and a few other supplies.

First, clean the tire and remove any dirt or debris. Next, decide on the design you want to create. Once you have your vision in mind, it’s time to start painting!

Be sure to use weather-resistant paint so that your stand can withstand the elements. Once you’re finished, simply place your umbrella in the center of the tire and fill it with sand or water to keep it from blowing away.

16. Wine Crate Umbrella Stand

Made from a recycled wine crate, it’s both eco-friendly and chic.

And best of all, it’s easy to make!

Just follow these steps:

• Start by finding a suitable wine crate. You can often find them at flea markets or second-hand stores. If not, you can always order one online.
• Once you have your crate, give it a good cleansing. You can either wash it with soap and water or sand it down to remove any dirt and grime.
• Once it’s clean, decide on a location for your stand. If you’re using it indoors, you’ll want to make sure it’s near an entryway or other high-traffic area. If you’re using it outdoors, choose a spot that’s protected from the elements.
• Attach each of the crates that will create a hole between all of the crates where you can put your umbrellas. On the other side, you can use the other part of the crate to store the boots.

17. Galvanized Buckets

Instead of throwing away the old galvanized tub in your house, you can transform it into a functional umbrella stand. The galvanized material can also be the key element of the rustic style.

To start, you can simply put the umbrella stick to the tub, then fill in the tub with some sand, gravel, and stones to make it stable.

You can also add the caster to the tub so you can move it whenever you wish. And if you want a fresher atmosphere, you can plant some flowers instead.

18. Antique Trunk Umbrella Stand

This project is relatively simple, and it’s a great way to repurpose an old trunk that might otherwise be headed for the landfill.

To get started, clean out the inside of the trunk and Sand down any rough areas on the exterior. Then, apply a coat of paint or stain. Once the paint or stain is dry, drill a hole in the side of the trunk and insert the umbrella.

19. Movable Umbrella Stand

The movable umbrella stand will be an excellent addition to your home if you have kids or pets. It is also perfect if you entertain often as it can be easily moved out of the way when necessary.

You will need a few supplies including:

• PVC pipe
• Casters
• Wood scraps
• Drill
• Miter saw
• Paint or Stain

First, cut the wood scraps to the desired size, then sand them down for a smoother surface before you piece them together.

Stain the wooden box to highlight its natural color. Put the base to the box, then pour the concrete. Once the concrete perfectly dry, attach the top.

20. Table Umbrella Stand

A patio umbrella stand helps to keep your umbrella securely in place, so you can enjoy your outdoor space without worry.

If you have a patio table with a hole in the middle, you’re in luck-you can easily turn it into an umbrella stand with this simple DIY project.

All you need is a piece of plywood and some heavy-duty screws. Cut the plywood to fit snugly inside the hole in your table, then drill four holes around the perimeter.

Screw the plywood into place and you’ve got yourself a sturdy umbrella stand.

21. Outdoor Umbrella Stand

With just a few supplies, you can create an outdoor umbrella stand that will be the envy of your neighborhood.

Start by finding a large planter or bucket that is big enough to hold your umbrella. Then, fill the bottom of the container with sand or gravel to weigh it down. Next, add a layer of stones or bricks around the outside of the container. Finally, place your umbrella in the center of the stand and enjoy your new shady spot.

For a better look, consider planting some flowers.

22. DIY Umbrella Stand Side Table

This simple project can be completed in just a few hours, and it’s a great way to make use of an old table or dresser that you may have sitting around.

To get started, simply flip the table upside down and screw in a few heavy-duty caster wheels. Then, cut a hole in the center of the tabletop big enough to fit your umbrella base.

23. Terracotta Pot Umbrella Stand

A terracotta pot umbrella stand is a fairly simple project that anyone can do. All you need is a large terracotta pot, some sand, and a few rocks.

Just fill the bottom of the pot with sand, arrange the rocks around the edge, and then place your umbrellas in the pot. The sand will help to keep them steady, and the rocks will add weight so that the stand doesn’t tip over in strong winds.

Plus, the terracotta pot will add a touch of rustic charm to your space.

24. Small Umbrella Stand

This DIY Umbrella Stand is small enough to fit in any space. It’s also easy to make, so you can get it done in no time.

First, cut a piece of plywood to the desired size. Then, use a router to cut a groove around the perimeter of the plywood. Next, apply a finish of your choice and let it dry. Finally, attach the umbrella stand to the fence of the patio.

25. DIY Patio Umbrella Stand

To make this umbrella stand, you need to cut the wood and drill pocket holes. Next, sand down any rough edges before assemble it.

When it is perfectly assembled, you can now start painting or staining it. Attach the top to the base with hinges (ensure you create a hole for the umbrella stand).

This versatile feature will be functional in your outdoor space where it can be an umbrella stand, extra storage and side table on your patio.

26. DIY Simple Umbrella Stand

This DIY project is easy and affordable, and the best part is that you can customize it to match your decor.

To get started, all you need is a bit of wood, some paint or stain, and a few basic tools. Once you’ve gathered your supplies, simply follow the instructions below to create a one-of-a-kind umbrella stand that will keep your outdoor seating area shade.

First, cut your wood to size. If you’re using new lumber, you’ll need to sand it down before painting or staining. Next, apply your finish of choice and allow it to dry completely. Once the finish is dry, screw the pieces of wood together using long screws or nails. Put the umbrella base before you attach the top.

After all, you can add some decorative pieces surrounding it.

And that’s a wrap. So, the next time it rains and you find yourself without an umbrella stand, don’t fret! Just get creative and use one of these ingenious DIY ideas to keep your floors dry.