Building a squirrel trap is a simple and effective way to protect your garden from these pests animal. While these furry little creatures may be cute, they can also wreak havoc on your garden. The smart way to keep them out of your prized flowers is to build a DIY squirrel trap.

This trap is easy to construct and can be baited with various foods, including nuts and seeds. Once the squirrel enters the trap, the door will close behind it, preventing squirrels from escaping. You can then release the squirrel into the wild far away from your home.

Get inspired by looking at the following ideas that will make your yard free from unwanted squirrels.

1. DIY Live Trap

Lockable Diy Live Squirrel Trap
Source: alibaba.com

While there are a variety of commercial traps available, they can be expensive and difficult to use. A more convenient option is to build your trap using materials you likely already have around the house.

Here’s what you’ll need:

  • A large plastic container with a lid
  • Some bait (peanut butter or nuts work well)
  • A piece of wood or cardboard to serve as a ramp

To build the trap, cut a hole in the container’s lid that is big enough for the squirrel to fit through, add some bait to the inside, and prop up the ramp to lead into the container.

When the squirrel enters the trap, they will be unable to escape, and you can release them far away from your home.

2. DIY Cage Trap

Live Animal Trap For Squirrels
Live Animal Trap For Squirrels | Source: youtube.com

A DIY cage trap is a simple but effective way to capture a squirrel. It would be best to have a wire cage, some bait, and a little patience.

Position the cage in an area where you have seen the squirrels active, and place some bait inside the cage. Once the squirrel enters the cage to get the bait, the door will close behind them, trapping them inside. You can then relocate the squirrel far away from your home, giving you peace of mind that they will not be causing any more damage.

If you are not interested in relocating the squirrel, you can also use a DIY cage trap to euthanize them humanely. This is done by adding a lethal dose of carbon monoxide to the cage, which will quickly and painlessly kill the squirrel.

3. Recycle The Unused Bottle Trap

Diy Plastic Bottle Squirrel Trap

Need to get rid of a squirrel problem? You can make your own trap with just a few household items.

First, you’ll need an unused bottle. It can be any size, but a two-liter soda bottle works well. Cut the bottle in half lengthwise, then inverted the top half so it fits snugly inside the bottom half.

Next, secure the two halves together with duct tape or heavy-duty glue.

Next, drill a small hole in the center of the bottle’s cap. The hole should be big enough for a metal coat hanger to fit through.

Now you’re ready to bait your trap. Squirrels are attracted to nuts and seeds, so try using peanut butter or sunflower seeds as bait.

4. Bucket Squirrel Removal

Bucket Squirrel Removal

One of the most common problems homeowners face is dealing with pesky squirrels. If you’ve ever seen a squirrel running around your yard, you know how difficult they can be to catch. However, there is a way to trap them using nothing more than a bucket and some bait.

The first step is to find a large enough bucket to fit the squirrel. Next, drill a hole in the side of the bucket, just big enough for the squirrel to hold its head through. Then, place some bait inside the bucket and wait for the squirrel to take the bait.

When the squirrel‘s head is through the hole, the body’s weight will cause the bucket to tip over, trapping the squirrel inside. This method may take some patience, but it is a surefire way to catch a squirrel.

5. Simple Homemade Squirrel Trap

Simple Homemade Squirrel Trap
Source: rosecitybungalow1913.blogspot.com

There is a way to trap them using nothing more than a bucket and some bait.

The first step is to find a large enough bucket to fit the squirrel. Next, drill a hole in the side of the bucket, just big enough for the squirrel to hold its head through. Then, place some bait inside the bucket and wait for the squirrel to take the bait.

Once the squirrel‘s head is through the hole, the weight of its body will cause the bucket to tip over, trapping the squirrel inside. This method may take some patience, but it is a surefire way to catch a squirrel.

6. Create The Affordable One

Diy Cheap Squirrel Trap
Source: www.mtfca.com

Instead of buying the squirrel trapping, consider this DIY squirrel trap.

It’s cheap, easy to make, and works like a charm. You need a five-gallon bucket, wire, and a few other items that you probably have around the house.

The first step is to cut a hole in the side of the bucket big enough for a squirrel to fit through. Then, line the inside of the bucket with wire, leaving an opening at the top.

Fill in the bucket with water, then wait until the squirrel gets trapped.

7. Wooden Box Squirrel Trap

Wooden Box Squirrel Trap
Source: freewoodworkingplan.com

It’s essential to choose the correct size box, as you don’t want the squirrel to be able to escape. You’ll also need some bait, such as nuts or seeds, to lure the squirrel into the trap.

When the squirrel is inside, the door will close, and they will be unable to get out. You can then release the squirrel into the wild away from your home. This type of trap is humane and effective, and it’s a great way to get rid of the trapped squirrel without harming them.

8. DIY PVC Squirrel Trap Ideas

Diy Pvc Squirrel Trap Ideas
Source: swcage.com

While there are many original designs, one of the most popular is the PVC squirrel trap. These traps are relatively easy to build, and they can be pretty effective at catching squirrels.

To build a PVC squirrel trap, you will need some PVC pipe, a piece of wire mesh, and a few other supplies. Once you have everything you need, follow the instructions below.

First, cut a piece of PVC pipe that is about two feet long. Next, drill a hole in the side of the pipe, just big enough for a squirrel to fit its head through.

After that, line the inside of the pipe with wire mesh and then bait with some nuts or seeds. Finally, place the trap where you’ve seen squirrels, and wait for one to take the bait.

9. Trap Through The Wire Cage

Diy Wire Squirrel Trap
Source: www.traps.freeuk.com

It might be time to set a trap if you’re tired of finding your bird feeder emptied and your flowers nibbled. Chicken wire squirrel traps are a popular choice, as they’re relatively simple to make and can be adapted to fit any space.

They’re non-lethal, so you can release the squirrels unharmed once you’ve caught them.

What you will need:

  • Chicken wire
  • Few poles or stakes
  • Nails

When you’ve assembled your materials, build a cage around the area you want to protect.

Please make sure the cage is tall enough that the squirrel can’t jump over it, and be sure to leave an opening for the squirrel to enter.

When the cage is in place, add some bait (birdseed works well) and wait for a squirrel to enter. When one does, close the door behind it.

10. DIY Squirrel Trap Ideas From Plastic Bottle

Diy Squirrel Trap Ideas From Plastic Bottle
Source: Pinterest

It’s easy to make your squirrel trap at home using a plastic bottle.

You need a 2-liter soda bottle, some wire, and a little bait. Start by cutting the bottle in half lengthwise. Then, bend the wire into a hoop shape and attach it to the top of the bottle. Next, put some bait inside the bottle and set it outside in an area where squirrels are known to congregate.

Finally, please wait for a squirrel to enter the bottle and release the wire hoop to trap it inside.

11. Keep It Simple

Cardboard Box Squirrel Trap
Source: instructables.com

The supplies to make a simple squirrel trap box are a large cardboard box, some wire mesh, and a few other household supplies. Just follow the instructions below, and you’ll be catching squirrels in no time.

To make your trap, start by cutting a hole in one side of the box big enough for a squirrel to fit through. Then, line the inside of the box with wire mesh to keep the squirrel from escaping. Next, bait the trap with some nuts or seeds, and then place it in an area where you’ve seen squirrels.

Finally, please wait for a squirrel to enter the trap and close the door behind it. You can then release the squirrel into the wild away from your home.

12. Trapping Squirrels In Attics

Trapping Squirrels In Attics
Source: www.guildfordpestcontrol.com

If you have a squirrel problem in your attic, you can do a few things to trap them. First, you’ll need to find out where they’re getting in. Next, locate the entry point, and seal it up with some hardware cloth or another sturdy material.

Then, set up a squirrel trap (live traps work best) near the entry point and bait it with some nuts or seeds.

13. Using A Havahart Squirrel Trap

Using A Havahart Squirrel Trap
Source: www.pests.org

Havahart traps are one of the most popular choices for trapping squirrels. They’re easy to use and can be baited with various foods.

To set up your Havahart trap, follow the instructions that come with it. Then, wait for one to enter once you have the trap set up, baited, and in an area where squirrels are known to frequent.

14. DIY Double Door Squirrel Trap

DIY Double Door Squirrel Trap
Source: Amazon

Anyone who has ever tried to get rid of squirrels knows that they can be incredibly pesky creatures. But there’s no need to call an exterminator – with a little know-how, you can make your squirrel trap.

The first step is to choose the best bait. Squirrels are attracted to various foods, including nuts, seeds, and fruits.

When you ensure you’ve baited the trap, the next step is to set it. There are a few different ways to do this, but the double-door design is one of the most effective. This trap uses a trigger that releases two doors, trapping the squirrel inside.

15. Make Use Of The Wood

DIY Wood Squirrel Trap
Source: www.animalcontrolproducts.com

This trap is made out of wood, so it’s completely safe for the squirrels. And, it’s easy to make too. Just follow the steps below, and you’ll have your own squirrel trap in no time.

First, you’ll need to find a suitable piece of wood. A 1×2 or 1×3 board will work nicely. Next, cut the board to the desired length, making sure that it’s wide enough to fit across the opening of your trash can.

Next, drill a few holes in the board for the wire to go through. Ensure that the holes are big enough for the squirrel to fit its head around.

16. How To Make DIY Squirrel Trap

Diy Dual Door Squirrel Trap
Source: aliexpress.com

Now that you know how to make a squirrel trap, it’s time to put your skills to the test. Follow the instructions below, and you’ll be catching squirrels in no time.

First, choose the right bait. Squirrels are attracted to various foods, including nuts, seeds, and fruits.

Next, set up your trap. There are a few different ways to do this, but the double-door design is one of the most effective. This trap uses a trigger that releases two doors, trapping the squirrel inside.

Finally, wait for a squirrel to enter the trap and close the door behind it.

These traps will work to some degree, but the most crucial part is choosing the best squirrel trap for your situation.

If you have a lot of squirrels in your yard, like gray squirrels, red squirrels, ground squirrels, or even flying squirrels, try multiple traps set in different locations. Be patient and keep an eye on your traps; soon enough, you’ll have that pesky squirrel out of your yard.